Blacksmith / Bladesmith Supplies
| Home |
Blacksmith
Supplies | Gas Forge Parts | Z Burners ™| Modified Sidearm Burner | Square Body Atmospheric Gas Forge | Atmospheric Forge | Mini Forge | Simple Air Hammer | Frequently Asked Questions | Coffee Can Forge | Simple
Gas Forge Plans | Legal
Information | Forge Gallery | Contact | Firebrick Gas Forge | Firebrick
Gas Forge Pg. 2 |
Air Tank
Forge |  |
Blacksmith Twisting Wrenches For Sale. Heavy Duty Blacksmith Twisting Wrenches They are approximately 27.5” long and weigh a little over 5.4 pounds. These are great when twisting larger stock. They were made using new 15” wrenches. They are $48.00 each plus shipping. Send me a PM if interested. I have 2 currently available These wrenches were made from new Crescent brand wrenches Model C79. The finished wrenches are approximately 17.5” long. They are $38.00 each plus shipping. Four are currently available. Send me a PM if interested
|
 |
 |
Danbanas, Blacksmith Head Wrap, Doo
Rags These are made of 100 % Cotton and are machine washable. One size fits all. They are $5.00 each plus shipping. We have many styles to choose from Solid colors, Camo, Paisley, wild, novelty and many more. These are great to wear especially if you are using a coal forge. |
 |
 |
Z Weld™ Welding Compound.
The
premier
gas forge welding flux is great for welding in coal or
coke forges. One of the great things about this
flux is that it will not drip or foam up during
welding like most fluxes on the market, therefore,
avoiding damage to the forge lining. A one pound
can is $18.00 each, plus shipping. I have had
this flux out on a trial basis for about the last 10
months to blacksmiths, farriers, and bladesmiths all
over the country and had nothing but rave reviews
about the performance of this product.
Click
here for additional information
|
 |
Small Jingle Bell
Blanks These Laser Cut Hot Roll Steel 14 gauge Jingle Bell blanks are 2 5/8" wide x 2 5/8" high. The blanks are $1.50 each, plus shipping. The 7/16" ball bearings that you use with the bell blanks are sold separately for $.15 each. Click here for additional information. In Stock |
|
 Large Jingle Bell BlanksThese Laser Cut Hot Roll Steel 10 gauge Jingle Bell blanks are 3.5" wide x 3.5" high. The blanks are $2.00 each, plus shipping. The 1/2" ball bearings that you use with the bell blanks are sold separately for $.15 each. Click here for additional information. In Stock |
 |
Tong Clip Laser cut from 10 Gauge Hot Roll steel. They will fit most size tongs even the ones with ball ends. The tong clips are $4.00 each plus shipping. |
 |
Please send your comments or suggestions to : zman59@earthlink.net
Copyright © 2009-2021 Larry Zoeller / Zoeller Forge
Last Revision 03/19/21